Pickets are the vertical boards that make up the finished surface of a fence. They are typically 1/2″ – 1″ thick, by 4″ – 6″ wide. Rails are the horizontal members to which the pickets are fastened. They are commonly 2″ thick by 3″ – 4″ wide.

What does a 1×6 actually measure?

A 1×6, for example, actually measures 3/4″ x 5 1/2″. In this case, the planing is necessary for a smoother surface, so that the board could be used for interior applications. The length of the boards is generally exactly what you order, though we usually only stock pieces of even lengths.

How far off the ground should a wood fence be?

In most applications, a wood fence should be installed at least two inches off the ground. Your posts and rot boards (if you choose to install them) should be the only fence components that contact the ground. Wood pickets should never touch it.

👉 For more insights, check out this resource.

Is it better to use screws or nails on a fence?

Nails are faster than screws to install, meaning less labor for you or your builder (which may translate into lower installation cost). However, nails are more likely than screws to grow loose over time. Screws, on the other hand, secure the fence better than nails.

👉 Discover more in this in-depth guide.

Why do 2×4’s have rounded edges?

2×4 have rounded edges as it’s very beneficial to the wood itself and those working with it. They reduce the number of injuries like unwanted splinters during the handling and manufacturing process and also ensure that the lumber stays looking its best all throughout until the customer sees it.

Do fence panels come in different widths?

The standard size of fence panels is 6 foot wide which is about 1.8M wide. six foot fence panels or 1.8M (sold as 6×6) five foot fence panels or 1.5M (sold as 6×5) four foot fence panels or 1.2M (sold as 6×4)